Furman P-2400 AR Power Conditioner True RMS Voltage Regulation Delivers Stable Voltage Output
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
The 20 amp P-2400 AR delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or over voltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-2400 AR accepts input voltage between 97V-137V and transforms it to a constant output of 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance. With it's robust 20A capacity, the P-2400 AR is ideal for high-current equipment such as power amplifiers or powering A/V racks in large installations. Additionally, the P-2400 AR is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman's Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP) and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available. |
| Protection Type: | Inrush Current |
| Protection Type: | Transient |
| Protection Type: | AC Noise |
| Protection Type: | Over Voltage |
| Protection Type: | Brownout |
| Protection Type: | Sag |
| Protection Type: | Spike |
| Protection Type: | Surge |
| Receptacle Type: | NEMA 5-20R |
| Receptacle Type: | USB |
| Receptacles Detail: | 14 x NEMA 5-20R |
| Receptacles Detail: | 1 x USB |
| Load Capacity (Watt): | 2400 W |
| Input Voltage: | 110 V AC |
| Input Voltage Range: | 90 V AC - 139 V AC |
| Output Voltage: | 120 V AC |
| Maximum Line Current: | 6.5 kA |
| Maximum Frequency: | 60 Hz |
| Cord Length: | 10 ft |
| Height: | 3.5" |
| Width: | 19" |
| Depth: | 12" |
| Weight (Approximate): | 39.68 lb |
| Additional Information: | - Spike Protection Mode: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
- Response Time: 1 nanosecond
- Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
- Power Consumption: 13 watts
|
| Compatibility: | - Power Amplifier
- Powering A/V Rack
USB Devices: |
Shipping Restrictions
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC:
654061028192
- Mfr's Part #:
P-2400 AR
(0 Ratings)
